|
|
|
|
Nozzles for Liquid Silicone Rubber Injection Molding Machines 
- Custom Built adapters offer an alternative LSR shutoff nozzle for most injection molding machine manufacturers.
- 1/2” radius, flat, extended ½” radius, 12mm, 15mm, 20mm and 25mm diving style tips.
- Three sizes for small, medium and large injection molding machines.
- Double-acting, pneumatically controlled internal shutoff pin.
- Completely water cooled.
|
SA921-G |
|
Material Pressure Regulators
- Essential device designed to increase shot-to-shot repeatability by controlling mixer outlet pressure accuracy.
- 600, 1000 and 3000 PSI output versions available
- Spring compensated diaphragm design
- Water cooling ports ~ 600 PSI version only
- Stainless steel construction
SN751-1A & SN751-2A Color Injector
- 0.5% to 7% additive range based on material output.
- Quick changeover time for color changes.
- 44:1 pigment-to-air ratio produces 4,400 PSI output pressure.
- Capable of dispensing pourables and pastes
- Fed By 2.5, 6, 12, or 20oz cartridges, pressure pot, color feed module.
- Two different mounting configurations for various static mixers
|
SA921 |
|
Material Filter Pack w/ Transducer |
Filter Packs
 Designed to reduce maintenance time due to blocked cold runner nozzles.- 178, 140 and 120 micron screen openings provide protection from the smallest particles.
- 1”, 2.5” and 3” screen diameters version available.
- 1/2” NPT port available for transducer or gauge monitoring output pressure.
- Stainless steel construction
Valves
- Needle & Seat Design, Air Operated
- ¼” NPT, ½” NPT & ¾” NPT Standard Models
SG263 Pneumatic Shutoff Valve |
|
